CCNA EIGRP Exam Lab | Addition of new Router in EIGRP Process

Practice EIGRP LAB for CCNA:

Burtaqtech has a small network running with EIGRP as IGP protocol. EIGRP  has the AS number of 12 on all routers. Router MGT is also running static routing to the ISP. Burtaqtech has recently added the ENG router, currently which do ‘not have connectivity to the ISP-router. You have to perform the following tasks for completing the configurations:

Find the faults and correct the router configurations to provide full connectivity between the routers.
Following are the IP-address schemes of all the routers in the following network.

MGT
Fa0/0 – 192.168.77.33
S1/0 – 198.0.18.6
S0/0 – 192.168.27.9
S0/1 – 192.168.50.21

Parts2
Fa0/0 – 192.168.12.65
Fa0/1 – 192.168.12.81
S0/1 – 192.168.50.22

Parts1
Fa0/0 – 192.168.12.33
Fa0/1 – 192.168.12.49
S0/0 – 192.168.27.10

ENG
Fa0/0 – 192.168.77.34
Fa1/0 – 192.168.12.17
Fa0/1 – 192.168.12.1
Image Courtesy: actualtests.com 



Solution:
This the very simple Lab to configure in the CCNA Exam, all you have to do to advertise the EIGRP network of new added router “ENG” on MGT router. As MGT is the main router which is connecting all the routers to ISP. In our scenario on ENG the interface which is connected to MGT have the IP address of 192.168.77.x, so we will advertise this network on MGT router in EIGRP 12.

So you are required the following configuration for compleing the above EIGRP lab.
On the MGT Router:
Config t
Router eigrp 12

Network 192.168.77.0

No comments:

Post a Comment

UA-23728446-1